|
|
| Home: Marine Catalog: Electronics: Galvanic Isolators:
30 Amp Prosafe Isltr FAIL SAFE
Cat. No. ProM-22034
Weight 3 lbs | $446.99 |
FailSafe Technology with Peace of Mind Dependability. The
ProSafe FS Series of FailSafe 30 and 60 Amp Galvanic Isolators will
interrupt galvanic current flow with other boats at a marina when
installed on a boat which is connected to AC Shore Power. This
technology maintains AC safety ground and solves the most common forms
of corrosion and premature zinc loss within a boats bonding system. The
ProSafe FS Series is UL Certified to meet the parameters of the ABYC
A-28 recommendation ProSafe FS installs easily and does not require a
dedicated monitor to verify the operational status of the galvanic
isolator as required by non FailSafe Certified galvanic isolators. Both
the ProSafe 30 and 60 Amp models are built on robust Flat Pack
Semiconductor platforms, ensuring that in the event of a failure, the
failure is safe by not compromising the ground continuity on-board when
connected to AC Shore Power.
- ABYC A-28 July 2008 Compliant and Fail Safe Certified: Certified
by Underwriters Laboratories (UL). Insures shore power safety ground
wire is maintained through the isolator.
- Flat Pack High Power Semiconductors: Robust high power diodes
allow the FS Series to meet the new FailSafe criteria for conducting
inrush currents 3,000 and 5,000 amps (FS30 and FS60 respectively) for
the required duration period.
- Innovative Design: The FS60 will cool itself in the event it must conduct current insuring cooler operation in this mode
- Ignition Protected: Meets ISO 8846 and either model can be mounted within an engine compartment
- Gold Plated Terminations: Simply install in your on board green
safety ground wire (between your AC inlet and your AC Panel) to
separate your DC Bonding System from your Shore AC Green wire
- Use the ProSafe FS30 for 30 Amp Shore Cord Applications
- Use the ProSafe FS60 for (1) 50 Amp or (2) 30 Amp Shore Cord Applications
|
|
|
