EcoVantage Marine
Marine Catalog


Home: Marine Catalog: Lights: Underwater Lights:

Lumishore-SMX152 Single Secondary EOS 60W Surface-Mount Underwater Light
Cat. No. LM600177
Weight 2 lbs

Polymer Housing, Color Changing, 10.5-31VDC, IP68

This is a single Secondary (i.e. slave) SMX152 EOS color-changing surface-mount underwater light fixture. Up to seven Secondary fixtures can be installed with a single Master unit. This is the choice when adding additional lights to your EOS Color Changing System. Other components required for a system include the Lumi-Hub and Controller (Lumi Switch, EOS Mini, EOS Mini WiFi). For details on how to build your own system and on the single and double light fixture starter packs, please download the EOS Color Changing Brochure in the downloads section of this web page.

When combined with the other components in the system, you will be able to enjoy unprecedented color control and ease of installation without the networking hassles. Simply connect the Lumi-Hub plug-and-play wiring system to your DC power source, plug in your lights along with your choice of controller, and installation is complete!

Have an on-board sound system? Connect your audio output to the EOS Mini Controller and you’ve just created your own ‘Sound-to- Light’ entertainment system - it’s that easy! Wow your guests by pulsing your underwater lights to the beat of the music in any color. color cycle, or oscillating pattern.
  • Brightest, most efficient, compact LED surface mount Color Change   Underwater Lights available
  • Suitable for transom or hull-side mounting
  • Recommended for boats up to 15m/50 feet
  • Full color-changing system (RGBW)
  • Six preset colors, color cycle, variable strobe, owner-controlled color mix
  • Up to 8 high-performance EOS SMX underwater lights fully synchronized on any control system
  • Corrosion proof - AOM polymer, chemically resistant bodies
  • Increased installation options - low profile and compact
  • The perfect "Swimming Pool" effect - wider beam angles
  • Above and below water operation - advanced light engine design with ATRB (Active Thermal Roll Back)
  • Battery Low Voltage warning system
  • Easy installation - integrated electronics and small hole requirement
  • "Easi-Seal" for simple and safe installation

Housing Finish/Material Transparent polymer mold with thermal-core
Lens Material Toughened Integrated Polymer
Cut-Out Dimensions 0.53" (13.5mm) for cable entry hole
Dimensions 4.33" (110mm) dia x 0.70" (18mm)
Max Wattage 60W
Input Voltage 10.5-31VDC
Power Consumption 5.0A (12V), 2.6A (24V)
Driver Multi-channel internal driver
Output Color RGBW
Luminous Flux 6400 fixture lms (white LED)
Correlated Color Temperature (CCT) Full spectrum color changing (RGBW)
Beam Angle 90°
Max Operating Temperature Use in ambient temps up to 125dg F (50dgC)
Lifetime Hours 50,000 +hrs
Mounting Method Screws
Install Location Surface (transon or hull side)
Ingress Protection IP68
Class III
Electrical Protections ATRB (automatic thermal rollback), surge, APR (auto power control), soft start, reverse polarity, in-rush current, power line noise suppression
Certifications & Compliance CE, ROHS
Manufacturer Lumishore
Warranty 2 Years

DownloadsInstallation Manual (1 MB) 
Product Brochure (2 MB) 
SMX152 Product Sheet (454 KB) 
Lumi-App Product Sheet (268 KB)

© EcoVantage Marine All rights reserved