|
|
| Home: Marine Catalog: Lights: Underwater Lights:
Lumishore-SMX153 EOS, I-Connect Hub, Command Center, 5Meter DMX Cable Kit: 2x
Cat. No. LM600423
Weight 8 lbs | $3,489.00 |
Polymer Housing, Color Changing, 10.5-31VDC, IP68
This is a single Master SMX152 EOS color-changing surface-mount
underwater light fixture. This is the choice when building your own
system and requires each component of the system to be purchased
separately. Only one master is required for a system of up to eight
fixtures. Other components in the system include the Lumi-Hub, a
Controller (Lumi Switch, EOS Mini, EOS Mini WiFi), and your secondary
(slave) light fixtures (i.e. SMX152 EOS Secondary models). For details
on how to build your own system and on the single and double light
fixture starter packs, please download the EOS Color Changing Brochure
in the downloads section of this web page.
When combined with the other components in the system, you will be able
to enjoy unprecedented color control and ease of installation without
the networking hassles. Simply connect the Lumi-Hub plug-and-play
wiring system to your DC power source, plug in your lights along with
your choice of controller, and installation is complete!
Have an on-board sound system? Connect your audio output to the EOS
Mini Controller and you’ve just created your own ‘Sound-to- Light’
entertainment system - it’s that easy! Wow your guests by pulsing your
underwater lights to the beat of the music in any color. color cycle,
or oscillating pattern.
- Brightest, most efficient, compact LED surface mount Color Change Underwater Lights available
- Suitable for transom or hull-side mounting
- Recommended for boats up to 15m/50 feet
- Full color-changing system (RGBW)
- Six preset colors, color cycle, variable strobe, owner-controlled color mix
- Up to 8 high-performance EOS SMX underwater lights fully synchronized on any control system
- Corrosion proof - AOM polymer, chemically resistant bodies
- Increased installation options - low profile and compact
- The perfect "Swimming Pool" effect - wider beam angles
- Above and below water operation - advanced light engine design with ATRB (Active Thermal Roll Back)
- Battery Low Voltage warning system
- Easy installation - integrated electronics and small hole requirement
- "Easi-Seal" for simple and safe installation
| Housing Finish/Material | Transparent polymer mold with thermal-core |
| Lens Material | Toughened Integrated Polymer |
| Cut-Out Dimensions | 0.53" (13.5mm) for cable entry hole |
| Dimensions | 4.33" (110mm) dia x 0.71" (18mm) |
| Max Wattage | 60W |
| Input Voltage | 10.5-31VDC |
| Power Consumption | 5.0A (12V), 2.6A (24V) |
| Driver | Multi-channel internal driver |
| Output Color | RGBW |
| Luminous Flux | 6400 fixture lms (white LED) |
| Correlated Color Temperature (CCT) | Full spectrum color changing (RGBW) |
| Beam Angle | 90° |
| Max Operating Temperature | Use in ambient temps up to 125dg F (50dgC) |
| Lifetime Hours | 50,000 +hrs |
| Mounting Method | Screws |
| Install Location | Surface (transon or hull side) |
| Ingress Protection | IP68 |
| Class | III |
| Electrical Protections | ATRB (automatic thermal rollback), surge,
APR (auto power control), soft start, reverse polarity, in-rush
current, power line noise suppression |
| Certifications & Compliance | CE, ROHS |
| Manufacturer | Lumishore |
| Warranty | 2 Years |
|
|
|
