EcoVantage Marine
Marine Catalog


Home: Marine Catalog: Electronics: Fuse Blocks and Fuses:

ST CLB Circuit Breaker Block - Position with Negative Bus
Cat. No. BS-ST CLB
Weight 1 lbs

ST CLB Circuit Breaker Block - 6 Position with Negative Bus
The advantage of a resettable circuit breaker over a fuse is well known however people find circuit breakers more expensive and difficult to install. The new ST CLB Circuit Breaker Block solves this issue by using the compact, snap-in-place CLB resettable circuit breaker which makes breakers as easy to install as a fuse.

  • Quick connect clips allow circuit breakers to snap easily into place
  • Tin-plated copper busses and screw terminals
  • Clear insulating cover with square format label recesses, satisfies ABYC/USCG insulation requirements
  • Easy to open clip on cover
  • Breakouts allow wire access in two directions
  • Accepts ring terminals
  • Optional push button waterproof boots or dress nuts can be installed over cover

Circuits 6
Maximum Amperage 100A (per block)
32A (per circuit)
Maximum Voltage 32V DC
Mounting #8 Screw (M4) or #8 Nut
Negative Bus Yes
Source Common Source
Minimum Operating Temperature -10° C
Maximum Operating Temperature 60° C
Mounting Centers 5.63in (143 mm)
Screw Terminal Type #8-32 Screws with Captive Star Lock Washer
Height 6.69in (169.93 mm)
Weight 0.75lb (0.34 kg)


© EcoVantage Marine All rights reserved