Mastervolt Mass Sine 24/5000 (230V/60Hz) Cat. No. MV-24195100 Weight 41.9 lbs

$6,580.97

Mass Sine 24/5000 (230V/60Hz) For the toughest tasks Even under the most extreme conditions the products from the Mass series operate faultlessly, giving you round-the-clock output when necessary. With an MTBF of 180,000 hours at full capacity and 24/7 use, the Mass products are ideal for the toughest tasks and any situation that requires a reliable power supply. Mastervolt’s Mass Sine inverters have been proving their value in the most extreme conditions for 30 years. Optimal flexibility in system design Choosing an independent sine wave inverter allows you complete freedom of choice of battery charging equipment. You can freely adapt the rating of these chargers, depending on the desired charge time. In case you want to use renewable energy sources, you may want to choose an MPPT solar charge regulator. High Efficiency The high efficiency and automatic economy mode are designed to allow digital clocks to work properly and ensure you many more hours of operation from your batteries. The application of high-frequency technology prevents any annoying humming and zooming sounds, while the high peak capacity ensures that the high inrush current required for electrical tools, for example, is seamlessly produced. Clear Indicators The Mass Sine features easy controls on the device itself. As inverters are often built in, we also supply an effective remote control panel, the C4-RI. In addition, the Mass Sine can be controlled via its intuitive display, the EasyView 5, thanks to the integration of MasterBus communication using a MasterBus Inverter Interface or AC Power Analyser. Easy and safe connections The Mass Sine inverters provide robust and professional connections for fast and safe installation. Features For heavy duty work in professional and semiprofessional applications. Full capacity at temperatures up to 40 °C. Pure sine wave output prevents failures and damage to connected sensitive equipment. High peak capacity for the seamless switching on of complex and heavy loads. MasterBus compatible. Suitable for mobile applications. Professional connections. Automatic, reliable and safe operation. Optional: Masterswitch/Systemswitch for automatic selection of the desired energy source. Mass Sine 24/5000 (230V/60Hz) Product code: 24195100 Find your Mastervolt dealer Arrow Specifications General specifications Output voltage (± 5 %) 230 V – 60 Hz (± 0.01 Hz) Output waveform true sine Nominal battery voltage 24 V Recommended battery capacity > 400 Ah Continuous power at 40 °C / 104 °F, cos phi 1 4000 W P30 power at 40 °C, cos phi 1 5000 W Peak load 9000 W AC connection internal Galvanic isolation yes Efficiency 92 % Display/read-out LED display Dimensions, hxwxd 470 x 315 x 254 mm 18.5 x 12.4 x 10.0 inch Weight 19 kg 41.9 lb Compliance CE E-mark ABYC A-31   Technical specifications Technology HF switch mode Low battery voltage, switches off at 19 V, ± 0.5 V Low battery voltage, switches on at 22 V, ± 0.5 V High battery voltage, switches off at 32 V, ± 0.5 V High battery voltage, switches on at 30 V, ± 0.5 V Max. ripple on DC (battery) 5% RMS Input current (nominal load) 230 A No-load power consumption (ON mode) 250 mA – 6 W No-load power consumption (energy saving mode) 50 mA - 1.2 W Minimal DC fuse (slow blow) 1x 250 A or 2x 125 A Minimal cable size 2x 70 mm² Harmonic distortion typical < 5% Cos phi all power factors allowed Transfer system the Masterswitch and Systemswitch can be connected to all sine wave inverters Temperature range (ambient temp.) -25 °C to 80 °C derating > 40 °C -13 °F to 176 °F Cooling natural/forced Protection degree IP23 Protections over temperature, over load, short circuit, high/low battery voltage MasterBus compatible yes, using a MasterBus Inverter Interface or AC power analyser