The Pro Installer insulated studs are a smart choice for marine
installers. Increased stainless steel stud length allows up to three
large cable lugs to be connected. The clear polycarbonate cover
provides insulation/protection, while the snap-out side skirts allow
for additional cable entry. The power tapping plate variant provides
additional termination points for small cables.
Features & Benefits:- Modular sizing and common interconnection
height: Easily linked with other Pro Installer Busbars and Fuseholders
saving installation time and space
- Power tapping plate converts
from a single stud, adding four connection points for smaller cables,
while preserving access for larger cables
- Compact footprint saves space
- Generous stud lengths allow securing of three 95mm² (3/0) cable lugs
- Innovative clear covers provide insulation/protection, with “snap outs” for extra cable access as required
- Label recess on cover allows fitting up to ½” width (12.7mm) printed labels
- Snap
out partition on double stud base provides insulation to separate studs
for isolated (positive/negative) application. Snapping this partition
allows easy linking of the studs
- Insert molded studs offer superior mechanical strength
- Four mounting holes in base allow installer choice of using two, or four fastenings depending on level of securing required
- Designed for the harsh marine environment
Specifications:- Power tapping plate: 4x 4mm (5/16”) terminals
- Maximum current through power tapping plate: 50A per terminal (4x 50A maximum)
- Note: no power passes through the stud so no amp rating is given
- 50 VDC
- High temperature, fiber reinforced plastic base provides strength and chemical resistance
- Clear poly carbonate cover
- Stainless steel studs/screws, and nickel plated brass nuts for longevity in the marine environment
- All threads are metric
- Stud details: 1 x 10mm (3/8”)
- Dimensions: 1.9" x 1.9" x 2.4" (49 x 49 x 62mm)
- Weight: 3.8 Oz (107g)
