EcoVantage Marine
Marine Catalog


Home: Marine Catalog: Electronics: Bussbars:

Pro Installer Double 8mm/10mm Insulated Stud
Cat. No. BEP-IST-10MM-8MM
Weight 1 lbs

The Pro Installer insulated studs are a smart choice for marine installers. Increased stainless steel stud length allows up to three large cable lugs to be connected. The clear polycarbonate cover provides insulation/protection, while the snap-out side skirts allow for additional cable entry. The power tapping plate variant provides additional termination points for small cables.

    Features & Benefits:
  • Modular sizing and common interconnection height: Easily linked with other Pro Installer Busbars and Fuseholders saving installation time and space
  • Power tapping plate converts from a single stud, adding four connection points for smaller cables, while preserving access for larger cables
  • Compact footprint saves space
  • Generous stud lengths allow securing of three 95mm² (3/0) cable lugs
  • Innovative clear covers provide insulation/protection, with “snap outs” for extra cable access as required
  • Label recess on cover allows fitting up to ½” width (12.7mm) printed labels
  • Snap out partition on double stud base provides insulation to separate studs for isolated (positive/negative) application. Snapping this partition allows easy linking of the studs
  • Insert moulded studs offer superior mechanical strength
  • Four mounting holes in base allow installer choice of using two, or four fastenings depending on level of securing required
  • Designed for the harsh marine environment
  • Note: no power passes through the stud so no amp rating is given
  • 50 VDC
  • High temperature, fiber reinforced plastic base provides strength and chemical resistance
  • Clear poly carbonate cover
  • Stainless steel studs/screws, and nickel plated brass nuts for longevity in the marine environment
  • All threads are metric
  • Double studs feature "snap out" insulating partition, to allow linking of studs
  • Double Insulated Stud (Developed to suit Yamaha engine installations where positive cable has 10mm (3/8”) lug, and negative cable has 8mm (5/16”) lug)
  • Stud details: 1 x 8mm (5/16”), and 1x 10mm (3/8”)
  • Dimensions: 1.9" x 1.9" x 2.4" (49 x 49 x 62mm)
  • Weight: 3.7 Oz (105g)

© EcoVantage Marine All rights reserved