|
|
| Home: Marine Catalog: Cabin Accessories: Recessed Light Fixtures:
Ripple PowerLED, 10-40VDC Polished SS
Cat. No. ILIM63601
Weight 2 lbs | |
Ripple PowerLED, 10-40VDC
Featuring 2-wire power & dimming, Ripple easily replaces existing legacy
(halogen) spots negating the need to run extra wires. Integrated drive electronics
eliminates the need for remote driver installation. Carefully designed optics
result in fully blended illumination free of annoying artifacts or distracting
hot spots. A robust thermal management system results in maximum life with
minimal lumens depreciation over its expected working life (50,000+ hrs).
Ripple offers single or bi-color dimming when paired with Imtra's single
or dual channel PWM dimmer module. Ripple features a round bezel with rounded
radius edge. Ripple is securely mounted with three screws and is ideal for
hard ceilings (e.g. fiberglass or wood). It is a good choice for wet areas
(e.g. hard tops, arches, walkway overhangs, shower stalls). Made in the USA
and covered by a 5-year warranty!
- Twist-on round stainless steel bezel design
- Convenient 2-wire power & dimming (3-wires for Bi-Colors)
- Bi-color dimming using single momentary switch
- Integrated current controlled drive circuitry
- Screw mount fastening for watertight installations
| Trim Ring (Bezel) Finish/Material | Polished SS |
| Housing Finish/Material | Black Electrophoretic Aluminum |
| Lens Material | Frosted glass |
| Trim Ring (Bezel) Dimensions | 3.80" (96mm) dia |
| Cut-out Dimensions | 2.40" (61mm) |
| Recessed Depth | 1.05" (27mm) |
| Dimensions | See dimensional drawing |
| Integrated Switch | No |
| Input Voltage | 10-40VDC |
| Halogen Equivalency | 25W |
| Power Consumption | 4.7W |
| Driver | Integrated |
| Output Color | Cool White/Blue |
| Luminous Flux | 297 lms |
| Correlated Color Temperature (CCT) | 6000K (White LED) |
| Color Rendering Index (CRI) | 85 |
| Lifetime Hours | 50,000 hrs |
| Dimmer Compatibility | ILIM80130, ILIM80140 |
| Dimmer Control Interface | Momentary Push-Button |
| Dimming Range | 5-100% |
| Install Location | Exterior (hard tops, overhangs, showers) |
| Ingress Protection | IP65 (applies only to frontal water exposure, i.e. Exposed surface) |
| Class | III |
| Electrical Protections | Reverse Polarity, Transient & Spike Protection |
| Certifications & Compliance | CE-EMC, ROHS |
| Manufacturer | Imtra |
| Warranty | 5 Years / 1 Year Finish |
|
|
|
