Install Mastervolt ChargeMaster and rest assured that your
batteries are always quickly and completely charged, whether you are at
home, on the road or at sea with low shore power or limited supply.
Mastervolt’s 3-step+ charging method guarantees optimum efficiency,
meaning your batteries will perform better and last much
longer. Its direct current outlet is so clean that the battery
charger itself can be used as direct power source, even without a
battery.
The high frequency switch mode technology, in which advanced
microprocessors combine a myriad of functions, causes an extremely
accurate charge characteristic. Furthermore, this battery
charger has a unique memory function which prevents the charger
starting a new 3-step charge cycle if the supply voltage is
interrupted. The model is equipped with an LED status indicator
displaying the stage of the 3-step charge cycle while several remote
panels are available as option for even more convenience.
MasterBus
With MasterBus,
Mastervolt is taking the next step forward in implementing system
intelligence, reducing wiring, simplifying installations, improving
flexibility for everyone. Be it the installer, yard, service personal
or the end customer.
All in all it gives you the power to be independent
Specifications
General
specifications |
|
|
Nominal output voltage |
24 V
|
|
Total charge current |
30 A
|
|
Number of battery outlets |
3
|
|
Charge current third output |
30 A
|
|
Charge current second output |
30 A
|
|
Battery capacity range |
60-300 Ah
|
|
Nominal input voltage |
120/230 V (50/60 Hz)
|
|
AC connection |
connector strips
|
|
Supplies your system without battery |
yes
|
|
Display/read-out |
LED display
|
|
Dimensions, hxwxd |
11,46 x 8,27 x 5,16 inches
|
|
Weight |
8,82 pounds
|
|
Fastening |
with supplied mounting bracket or 4x screw for wall mounting
or 4x screw for floor installation
|
|
Approvals |
CE, E-mark, ABYC A-31, SAE J1171/ISO 8846 ignition protected
|
|
Technical
specifications |
|
|
Charge characteristic |
IUoUo, automatic / 3-step+ for gel/AGM/wet/Lithium Ion
|
|
Charge voltage Bulk |
28.8 V
|
|
Charge voltage Absorption |
28.5 V
|
|
Absorption time |
4 hours
|
|
Charge voltage Float (wet batteries) |
26.5 V
|
|
Charge voltage Float (gel/AGM
batteries) |
27.6 V
|
|
Temperature compensation |
-104.8 mV/ °F
|
|
Voltage compensation |
automatic
|
|
Power consumption (DC side) |
< 2.5 mA
|
|
Full load consumption (230 V AC) |
925 W
|
|
Current Control function |
yes, through MasterBus
|
|
Power factor control |
? 0.98
|
|
Temperature range (ambient temp.) |
-13 to 140 °F
|
|
Cooling |
vario fan
|
|
Sound level |
< 52 dBA at 1 mtr
|
|
Protection degree |
IP23
|
|
Protections |
over temperature, over load, short circuit, high battery, low
battery
|
|
MasterBus compatible |
yes
|
|
CSI/DC alarm |
yes, using a Multipurpose Contact Output (code 77030500)
|