|
|
| Home: Marine Catalog: Batteries: Chargers:
Mastervolt ChargeMaster 12/10 sealed (IP65)
Cat. No. MV-43011000
Weight 2.2 lbs | $337.48 |
ChargeMaster 12/10
- 3-Step+ charging technology for fast and complete charging.
- Safe and complete charging due to standard safety features.
- Memory function prevents overcharging in case of an unstable power supply.
- Clear control panel.
- Easy to install.
- Built-in system functionality (MasterBus) in combination with
other Mastervolt products (not available on ChargeMaster 12/10 and
ChargeMaster 12/15-2).
Power you can rely on
Make the most of your batteries with the ChargeMaster, plugging in and
charging anywhere in the world. Mastervolt’s ChargeMaster guarantees
fast and complete charging of your batteries no matter where you are.
The ChargeMaster can charge multiple battery banks simultaneously
thanks to its combined functionality. Moreover, all ChargeMasters can
be easily connected to a MasterBus network with only one cable and one
connection (not available on ChargeMaster 12/10 and ChargeMaster
12/15-2). You also have the option of central, local or remote
monitoring, configuration and control of your system. The ChargeMaster
is available in various models to guarantee you the ideal battery
charger for any situation and demand.
Charging your batteries with every voltage
The Mastervolt ChargeMaster supplies a maximum capacity wherever you
are via auto-ranging. Auto-ranging ensures perfect fully automatic
operation anywhere in the world, regardless of the available mains
voltage (90-265 V AC, 50 or 60 Hz). The 3-step+ charging technology
guarantees fast and complete charging, while the cos phi 1 regulation
gets the most out of limited generator capacity.
Sturdy connections
Metal-on-metal fitting gives a firm connection, and prevents corrosion or overheating of contact surfaces.
Charging multiple battery banks
The ChargeMaster series has three equal charge outputs. Those of the
smaller ChargeMaster models are pre-installed with two metres of cable
for a plug & play solution, while the heavier models have one full
output (for example for your service battery) and two outputs of 10 A,
ideal for your starter batteries.
Specifications
|
| General
specifications |
|
|
|
Nominal output voltage |
12 V |
|
Total charge current |
10 A |
|
Number of battery outlets |
1 |
|
Battery capacity range |
25-100 Ah |
|
Nominal input voltage |
230 V (180-265 V), 50/60 Hz |
|
AC connection |
socket |
|
Supplies your system without battery |
no |
|
Display/read-out |
1 LED |
|
Dimensions, hxwxd |
7,09 x 4,76 x 1,97 inches |
|
Weight |
2,20 pounds |
|
Fastening |
screw |
|
Approvals |
CE, E-mark, ABYC A-31 |
|
| Technical
specifications |
|
|
|
Charge characteristic |
IUoUo, automatic 3-step+ for gel/AGM/wet/Lithium Ion |
|
Charge voltage Bulk |
14.25 V |
|
Charge voltage Absorption |
14.25 V |
|
Absorption time |
6 hours |
|
Charge voltage Float (wet batteries) |
13.25 V |
|
Charge voltage Float (gel/AGM batteries) |
13.8 V |
|
Voltage compensation |
automatic |
|
Power consumption (DC side) |
< 1 mA |
|
Full load consumption (230 V AC) |
170 W |
|
Current Control function |
no |
|
Power factor control |
> 0.95 |
|
Temperature range (ambient temp.) |
-25 °C to 60 °C, derating > 40 °C
-13 °F to 140 °F |
|
Cooling |
natural cooling |
|
Sound level |
< 30 dBA at 1 mtr |
|
Protection degree |
IP65 |
|
Protections |
over temperature, over load, short circuit, high battery, low battery
|
|
Cooling
|
natural cooling
|
|
MasterBus compatible |
no |
|
CSI/DC alarm |
no |
|
|
|
