Primary Wire 12 AWG Cat. No. ANC-PW12 Weight 5 lbs

• ANCOR Marine Grade™ wire is manufactured from tinned copper stranding for maximum protection against corrosion and electrolysis. Ultra flexible (Type 3) stranding resists fatigue due to vibration and flexing. • ANCOR’s proprietary premium vinyl insulation stays flexible even in extreme cold and resists salt water, battery acid, oil, gasoline and ultra-violet radiation. Exclusive insulation is rated at 600 volts, 105° C dry and 75° C wet, and is resistant to heat and abrasion. • Exceeds all UL 1426, US Coast Guard Charterboat (CFR Title 46) and ABYC standards. • ANCOR supplies a full line of Marine Grade™ primary (single conductor) wire in sizes from 18 AWG to 10 AWG, all in ABYC recommended colors, and in standard lengths from 8 foot mini-spools to 1,000 foot bulk spools. 12 AWG /3 mm2 UL 1426 Tinned Boat Cable MARINE GRADE™ 12 AWG /3 mm2 WIRE SPECIFICATIONS Nominal O.D. 5/32” 4 mm Wt./1000’ 31 lbs. 14 kg Stranding 65 of 30 AWG Cir. Mil Area 6500 Square mm 3.31 Ohms/1000’ 1.75 “To avoid…electrical problems • Make high quality terminations that are clean, tight, and water/moisture resistant • Use high quality, marine related materials, including Type III tinned copper, marine wire. • Calculate and select adequate wire size”. Gord May GOOD OLD BOAT Magazine Colors: 106002, Black 186103, Dk. Blue 186203, Brown 186303, Green 186403, Grey 186503, Orange 186603, Pink 186703, Purple 186803, Red 186903, White 187003, Yellow Sizes: 25 FT 106002 : $14.22 100 ft, 106010 : $33.11 250 ft, 106025 : $83.86 400ft, 106040 : $123.38 1000 ft, 106099 : $295.67