EcoVantage Marine Catalog

Home: Mobile Marine Catalog: Pumps: Bilge:

Rule 800 GPH Rule-MateŽ Automated 12v
Cat. No. RULE RM800B
Weight 6 lbs

Rule's  800 G.P.H. Pumps offer increased capacity in keeping with it's 3/4" (19mm) discharge outlet. 12 Volts DC unless noted.

The Rule-Mate series of automated bilge pumps feature a pump and a non-mercury float switch in a single, compact housing. When the float rises, the pump turns on. There is no on/off cycling and therefore, no power use until the pump comes on. The pump remains on until the float drops and the pump senses no load against the impeller. Thoughtfully designed, Rule-Mate® pumps can be used in practically all bilge pumping applications.

  • Connections: For 19mm (3/4") bore hose on outlet
  • Dimensions: 112mm high, 130mm long, 73mm wide.
  • Fuse Size: 5(amp)
  • Output: Up to 56 litres/minute (12 gallons/minute). Max. recommended discharge head 3m.
  • Fully automated bilge pump with integral sensor.
  • Back up feature to prevent dry running if sensor is fouled, pump reverts to 2.5 minute cycle mode.
  • Compact pump for smaller vessels.
  • Tough plastic body.
  • Back flow prevention to reduce the amount of water left over in the bilge,
  • Air Vents in the body to help prevent air locks in challenging installations.
  • Quick release inlet strainer allows rapid cleaning.
  • Low amp draw conserves batteries.
  • Ignition protected.
  • Packaged Dimensions: L:18.00 x H:8.00 x W:20.00cm
  • Actual Weight: 0.48 Kg  (Approx. 0.68 Kg packed)



© 2019
EcoVantage Marine


Visit Our Full Website